First time in the field

and missed to set up the camera right.

Last Wednesday we had again a very nice sunset. The fog was hanging low in the valley of the Neckar and the Sun just began to rise when i set up my capische and started a Panorama.

The Panorama-Program was set up to capture around 180° horizontally and about 90° vertically. Problem was, that i set up the Canon SX200 with CHDK to take 3 pictures but i missed to set it up to M Mode. Result was that i ended up with many Pictures, each 1st one well exposed, each 2nd one underexposed and each 3rd one overexposed. Problem is that the pictures shot directly into the sun are way much less exposed in the 1st ones than the ones that are taken from the ground or from the sky.

Mental Note: Use M-Mode, take 5 pics and measure the right exposure to something middle light.

So i can show you the HDR tonemapped pano i put together of the horizontal pictures.

This one s then some 20 MPixel. If the Pics of the below and above the horizontal pictures i would have become a 56 Megapixel picture out of a 12.1 MPixel Canon SX 200.

First Post

Starting my first english blog for the capische robot i designed and built.

CaPiSche stands for Camera Pi Scheduler.

It is not only a scheduler. It can move, turn and tilt the camera while recording or between 2 pictures. The CaPiSche once started as a ArduinoPhotoBot (german) in April 2011. The first goal was to create spheric panoramas in HDR. Later i realized that i also can use it for gigapixel panoramas and for timelapse-photography.

After reaching (mostly my) limits in programming a decent graphical menu to the arduino to select the different modes it can be used i switched to a Raspberry Pi as heart of the whole project. The trick is that i then can use simple file handling, write in python, use a standard lighttp-Webserver as userinterface and i can use basic PC hardware as interface. But the most usefull benefit of hardware-switch is that i can edit the program interactive on screen or by ssh-client.